FYSETC 3D Printer Heated Bed Platform, 200X200 mm New Flex Magnetic Bed Build Plate 2 in 1 with Adhesive Backing Build Surface for Maker Select Plus V2 Prusa i3 Vinci 1.0 Tarantula I3 Ultimate Printer Fuyuansheng

Guaranteed delivery in 24 hours!

Reuse, easy remove(it is better for removing when the plate is cooler);
Separation type bending to take the model. It's more convenient.
No need the beauty of paper and scraper to assist the model.
Print not warped edge. No glue is needed.
Can be printed on cold bed.
Please kindly note:
If it doesn't stick, please don't worry, rotate the magnetic A side 90 degrees, match to the polarity.
Please level the build plate well before printing.
Please do not let heated nozzle touch the A plate directly !
Package includes:
7.8"/ 00mm A Plate+B Plate


Write Review
Keegan B. Connell
November 1, 2018
November 7, 2018
So this thing worked really great for a couple weeks and then the adhesive part started getting giant, hard air bubbles underneath it that weren't there when I applied it. I'm not saying I applied it perfectly or anything (which is why I'm giving it 3 stars instead of 1 for benefit of the doubt) but it's not my first time applying large adhesive pads and there were no air bubbles when I first applied it. My guess is maybe the adhesive reacting with the heat pf the printed bed (I only ever print on 40C) caused it to screw up but who knows. Either way maybe you'll get lucky with it so for the price I won't say it's garbage but it might be?
November 4, 2018
I personally really like the product. When I first put on it looked like it had a bubble, but I found out I just had it turned the wrong way. After I got it positioned right it snapped right down and holds great. I suggested a small piece of blue tape in a corner so you can put it back right without checking a few positions.

My parts don't warp at all on this material like they used to with tape.

It isn't super flexible, if you bend it too much it will crack. I work around the pad with my fingers just pulling away from the part slightly as I work my way around. A few times around and the part will come off. If you try to just start on one side and peel it off the part it will probably crack. (Source, I did that) :(

Recommend Products